For the crafter who wants it all comes the pro-
Constructed from industrial-
13" wide opening
a retail first -
Included with the Big Shot Pro
1 x sliding tray
1 x Standard Cutting Pad
1 x Premium Crease Pad
2 x 0.10 mm Mylar Shims
1 x Adapter Pad, which makes all Sizzix components compatible with the Big Shot Pro.
The Big Shot Pro Machine measures approximately 24 1/4" x 15" x 7 1/2".
The Big Shot Pro is so strong it has a
Three year guarantee.
Please note that to cut Sizzlits dies, Texture Plates and Textured Impressions Embossing Folders you will require a Solo Platform and a pair of standard Cutting Pads.
For Framelits and other very thin dies, a Wafer Thin Die Adaptor is also required which is supplied with the Solo Platform, available separately, or as part of the kit below.
For use exclusively with the Big Shot Pro Machine, the Adapter Pads are essential for cutting and embossing with Sizzix dies and embossing folder. Made of high quality plastic.
14 1/4" x 12 1/4" x 1/8"
For Sizzlit, Bigz and similar
For use exclusively with the Big Shot Pro Machine, the Cutting Pads are essential
for creating. When both sides are worn out, it is time for a replacement. Made of
high-
14 1/4" x 12 1/4" x 1/8"
Big Shot Pro Cutting Pads
For use exclusively with the Big Shot Pro Machine, the Sliding Trays move dies, big
and small, through the rollers of the machine, ensuring smooth, accurate die-
Made of high-
15 5/8" x 12 17/8" x 5/8"
Big Shot Pro Mylar Shims are used to compensate for minute variations in paper thicknesses and wear on the Cutting or Crease Pad. If the steel rule of the die fails to cut the shape completely, use one to two Mylar Shims.
Mylar Shims measure 0.10 mm thick
BY Sizzix
Item 656253
Pad
Item 656251
Item 656656
Item 656254
Item 656658
The Crease Pad is used to crease-
After extended use, the Plastic Slides on the Side Rails may show signs of wear. All four Plastic Slides should be replaced at the same time to ensure even wear in the future
Constructed of polypropylene, the
Solo Platform & Shim easily makes all Sizzix components thinner than a Bigz Die, such as a Framelit Die, compatible with the
Big Shot Pro Machine.
Big Shot Pro
Big Value Starter Kit
This is a real value kit, comprising the Big Shot Pro with all the items listed above, plus three essential additions, an extra pair of SCC cutting plates, a set of replacement slides and the Solo Platform and Thin Die Adaptor to allow the use of thin dies.
Any keen crafter will need these additional parts, and buying them together is a lot cheaper.
Scrappy Cat Crafts have made and sold cutting plates for most die cutting machines for many years. They are made to the exact size and from similar plastics, these plates give excellent performance at lower cost.
We keep good stocks so you never have to be without a cutting plate.
14 1/4" x 12 1/4" x 1/8"
By Scrappy Cat Crafts
Item 656253SCC
70201
Big Shot Pro
Die-
Metal Adaptor Plate
Item S124
Full size stainless steel adaptor plate. The metal adaptor plate improves performance for large detailed graphics
Item 656494
Item 656657
Item 657435
26" x 12 1/4" x 1/8"
For Bigz Pro and similar long dies
For use exclusively with the Big Shot Pro Machine, the Sliding Trays move dies, big
and small, through the rollers of the machine, ensuring smooth, accurate die-
Made of high-
27" x 12 1/2" x 5/8"
Replacement Plastic Slides
Item 656255
Mylar Shims
Item 656495